PF Series compression strength Less than 330Mp Coal primary Impact Crusher

PF Series Impact Crusher 1:Firm structure 2:Over-loading protection 3:Stone crusher from 50~250t/h 4:Low noise

PF Series Impact Crusher

Shanghai Rockreign Impact Crusher is acknowledged in this field for a long time and gives smooth running resulting power economy and higher efficiency. Our Impact Crusher is mainly used to crush many kinds of large, medium, small materials such as rock or stone whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. And The impact crusher (impactor) is widely used in hydroelectricity, highway, artificial rock, stone and sand, building material, etc.

PF impact Crusher:

This series of products are applicable for crushing the semi-hard materials and have big throughput and small granularity of materials.

Working Principle of PF Impact Crusher:

When the Crusher works, the motor drives the rotor rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process wont stop till the material are crushed to the required size and then discharged from outlet.

The main features of PF Impact Crusher:

1.Connected with locking sleeve assembly. 2.Final product with cubical shape. 3.The blow bar with high chrome. 4.Easy maintenance. Hydraulic or hand opening. 5. Easy maintenance and reliable operation.6. High reduction ratio and crushing efficiency; 7. No-board connection; The blow bar with high chrome (high chromed blow bar). 8. Impact plate with a special shape. 9. Crushed product with cubical shape.

 

Specifications of PF Impact Crusher

Type	Spec.	Feeder Opening (mm)	FeedingSize (mm)	CrushingCapacity (t/h)	Motor Power (KW)	Weight (T)
PF-0607	Φ644×740	320×770	100	10-20	30	6
PF-0807	Φ850×700	400×730	300	15-30	30-45	8
PF-1008	Φ1000×800	400×830	300	30-50	37-55	10
PF-1010	Φ1000×1050	400×1080	350	50-80	55-75	12
PF-1210	Φ1250×1050	400×1080	350	70-120	110-132	14
PF-1214	Φ1250×1400	400×1430	350	130-180	132-160	18.6
PF-1315	Φ1320×1500	860×1520	500	160-250	180-260	19
PF-1320	Φ1320×2000	860×2030	500	300-350	300-375	24

NOTICE:ANY CHANGE OF THE TECHNICIAL DATA SHALL NOT BE ADVISED ADDITIONALY.

PF Series compression strength Less than 330Mp Coal primary Impact Crusher